Model ID: ODE-3-320153-1F4A
Series: Optidrive E3
Manufacturer: Invertek Drives

Performance

– Sensorless Vector Speed Control
– Power Supply: 24 Volt DC, 100mA, Short Circuit Protected, 10 Volt DC, 10mA for Potentiometer
– Digital Inputs:8 – 30 Volt DC, internal or external supply, Response time less than 4ms
– Output Frequency: 0 – 500Hz, 0.1Hz resolution
– Acceleration Ramp Time: 0.01 – 600 second
– Deceleration Ramp Time: 0.01 – 600 seconds
– Energy Optimizer
– Low Frequency Torque Boost
– Fire Mode: VFD ignores signals and alarm
– Constant Toque Mode
– Variable Torque Mode
– Skip Frequency function
– Spin Start
– V/F Characteristic Adjustment Voltage

Features

– Keypad: Built-in keypad as standard, optional remote mountable keypad
– Display: 7 Segment LED
– Lockable parameters: Avoid changes to VFD
– PC: OptiTools Studio
– Smartphone: OptiTools Studio
– Bluetooth: OptiStick Smart (accessory sold separately)

Primary Command Source

– Terminal Control
– Uni-directional Keypad Control
– Bi-directional Keypad Control
– Modbus Network Control
– PI Control
– PI Analog Summation Control
– CAN Control
– Master-Slave Mode

Compatible Motors

– Induction Motors (IM)
– Permanent Magnet Motors (PM)
– Brushless DC Motors (BLDC)
– Synchronous Reluctance Motors (SynRM)

Model ID: ODE-3-320153-1F4B
Series: Optidrive E3
Manufacturer: Invertek Drives

Performance

– Sensorless Vector Speed Control
– Power Supply: 24 Volt DC, 100mA, Short Circuit Protected, 10 Volt DC, 10mA for Potentiometer
– Digital Inputs:8 – 30 Volt DC, internal or external supply, Response time less than 4ms
– Output Frequency: 0 – 500Hz, 0.1Hz resolution
– Acceleration Ramp Time: 0.01 – 600 second
– Deceleration Ramp Time: 0.01 – 600 seconds
– Energy Optimizer
– Low Frequency Torque Boost
– Fire Mode: VFD ignores signals and alarm
– Constant Toque Mode
– Variable Torque Mode
– Skip Frequency function
– Spin Start
– V/F Characteristic Adjustment Voltage

Primary Command Source

– Terminal Control
– Uni-directional Keypad Control
– Bi-directional Keypad Control
– Modbus Network Control
– PI Control
– PI Analog Summation Control
– CAN Control
– Master-Slave Mode

Compatible Motors

– Induction Motors (IM)
– Permanent Magnet Motors (PM)
– Brushless DC Motors (BLDC)
– Synchronous Reluctance Motors (SynRM)

Model ID: ODE-3-420300-104B
Series: Optidrive E3
Manufacturer: Invertek Drives

Performance

– Sensorless Vector Speed Control
– Power Supply: 24 Volt DC, 100mA, Short Circuit Protected, 10 Volt DC, 10mA for Potentiometer
– Digital Inputs:8 – 30 Volt DC, internal or external supply, Response time less than 4ms
– Output Frequency: 0 – 500Hz, 0.1Hz resolution
– Acceleration Ramp Time: 0.01 – 600 second
– Deceleration Ramp Time: 0.01 – 600 seconds
– Energy Optimizer
– Low Frequency Torque Boost
– Fire Mode: VFD ignores signals and alarm
– Constant Toque Mode
– Variable Torque Mode
– Skip Frequency function
– Spin Start
– V/F Characteristic Adjustment Voltage

Features

– Keypad: Built-in keypad as standard, optional remote mountable keypad
– Display: 7 Segment LED
– Lockable parameters: Avoid changes to VFD
– PC: OptiTools Studio
– Smartphone: OptiTools Studio
– Bluetooth: OptiStick Smart (accessory sold separately)

Primary Command Source

– Terminal Control
– Uni-directional Keypad Control
– Bi-directional Keypad Control
– Modbus Network Control
– PI Control
– PI Analog Summation Control
– CAN Control
– Master-Slave Mode

Compatible Motors

– Induction Motors (IM)
– Permanent Magnet Motors (PM)
– Brushless DC Motors (BLDC)
– Synchronous Reluctance Motors (SynRM)

Model ID: ODE-3-420240-104B
Series: Optidrive E3
Manufacturer: Invertek Drives

Performance

– Sensorless Vector Speed Control
– Power Supply: 24 Volt DC, 100mA, Short Circuit Protected, 10 Volt DC, 10mA for Potentiometer
– Digital Inputs:8 – 30 Volt DC, internal or external supply, Response time less than 4ms
– Output Frequency: 0 – 500Hz, 0.1Hz resolution
– Acceleration Ramp Time: 0.01 – 600 second
– Deceleration Ramp Time: 0.01 – 600 seconds
– Energy Optimizer
– Low Frequency Torque Boost
– Fire Mode: VFD ignores signals and alarm
– Constant Toque Mode
– Variable Torque Mode
– Skip Frequency function
– Spin Start
– V/F Characteristic Adjustment Voltage

Features

– Keypad: Built-in keypad as standard, optional remote mountable keypad
– Display: 7 Segment LED
– Lockable parameters: Avoid changes to VFD
– PC: OptiTools Studio
– Smartphone: OptiTools Studio
– Bluetooth: OptiStick Smart (accessory sold separately)

Primary Command Source

– Terminal Control
– Uni-directional Keypad Control
– Bi-directional Keypad Control
– Modbus Network Control
– PI Control
– PI Analog Summation Control
– CAN Control
– Master-Slave Mode

Compatible Motors

– Induction Motors (IM)
– Permanent Magnet Motors (PM)
– Brushless DC Motors (BLDC)
– Synchronous Reluctance Motors (SynRM)

Model ID: ODE-3-420300-104A
Series: Optidrive E3
Manufacturer: Invertek Drives

Performance

– Sensorless Vector Speed Control
– Power Supply: 24 Volt DC, 100mA, Short Circuit Protected, 10 Volt DC, 10mA for Potentiometer
– Digital Inputs:8 – 30 Volt DC, internal or external supply, Response time less than 4ms
– Output Frequency: 0 – 500Hz, 0.1Hz resolution
– Acceleration Ramp Time: 0.01 – 600 second
– Deceleration Ramp Time: 0.01 – 600 seconds
– Energy Optimizer
– Low Frequency Torque Boost
– Fire Mode: VFD ignores signals and alarm
– Constant Toque Mode
– Variable Torque Mode
– Skip Frequency function
– Spin Start
– V/F Characteristic Adjustment Voltage

Features

– Keypad: Built-in keypad as standard, optional remote mountable keypad
– Display: 7 Segment LED
– Lockable parameters: Avoid changes to VFD
– PC: OptiTools Studio
– Smartphone: OptiTools Studio
– Bluetooth: OptiStick Smart (accessory sold separately)

Primary Command Source

– Terminal Control
– Uni-directional Keypad Control
– Bi-directional Keypad Control
– Modbus Network Control
– PI Control
– PI Analog Summation Control
– CAN Control
– Master-Slave Mode

Compatible Motors

– Induction Motors (IM)
– Permanent Magnet Motors (PM)
– Brushless DC Motors (BLDC)
– Synchronous Reluctance Motors (SynRM)

Model ID: ODE-3-420240-104A
Series: Optidrive E3
Manufacturer: Invertek Drives

Performance

– Sensorless Vector Speed Control
– Power Supply: 24 Volt DC, 100mA, Short Circuit Protected, 10 Volt DC, 10mA for Potentiometer
– Digital Inputs:8 – 30 Volt DC, internal or external supply, Response time less than 4ms
– Output Frequency: 0 – 500Hz, 0.1Hz resolution
– Acceleration Ramp Time: 0.01 – 600 second
– Deceleration Ramp Time: 0.01 – 600 seconds
– Energy Optimizer
– Low Frequency Torque Boost
– Fire Mode: VFD ignores signals and alarm
– Constant Toque Mode
– Variable Torque Mode
– Skip Frequency function
– Spin Start
– V/F Characteristic Adjustment Voltage

Features

– Keypad: Built-in keypad as standard, optional remote mountable keypad
– Display: 7 Segment LED
– Lockable parameters: Avoid changes to VFD
– PC: OptiTools Studio
– Smartphone: OptiTools Studio
– Bluetooth: OptiStick Smart (accessory sold separately)

Primary Command Source

– Terminal Control
– Uni-directional Keypad Control
– Bi-directional Keypad Control
– Modbus Network Control
– PI Control
– PI Analog Summation Control
– CAN Control
– Master-Slave Mode

Compatible Motors

– Induction Motors (IM)
– Permanent Magnet Motors (PM)
– Brushless DC Motors (BLDC)
– Synchronous Reluctance Motors (SynRM)

Model ID: ODP-2-42100-1H04B-MN
Series: Optidrive P2

Manufacturer: Invertek Drives

High Performance, Sensorless Vector Control

– Up to 200% torque from zero speed, 150% overload for 60 seconds
– Built-in EMC Filter
– Integral Brake Transistor
– Safe Torque Off function for machine critical safety circuits
– Extensive I/O and communications interface capabilities
– CAN and Modbus RTU communication built-in as standard
– Open Loop Vector control provides optimum control of the output torque level
– Better than 0.5% speed holding accuracy in Open Loop Vector Operation
– PID Closed Loop Tension Control with feedback from a load cell or dancer arm
– Encoder feedback option allows for a very wide speed range, even down to zero speed
– Multiple Preset Speed or Variable Speed operation
– Dedicated Hoist Mode Operation with motor holding brake control algorithm
– PM Motor control mode allows open loop operation with Permanent Magnet motors

Standards Compliance

– Low Voltage Directive: 2014/35/EU
– EMC Directive: 2014/30/EU
– Additional Conformance: UL, cUL, EAC, RCM
– Marine Certification: DNV Type Approval
– Environmental Conditions: Designed to meet IEC 60721-3-3, in operation. IP20 Drives: 3S2/3C2. NEMA 12 and NEMA 4X Drives: 3S3/3C3

Applications

– Industrial: Fans, Pumps, Conveyors, Cranes, Air Compressors
– Marine: Bow Thrusters, Elevators, Winches, Pumps, Hoist
– Mining & Quarrying: Feed Conveyers, Crushers, Cranes
– Metals & Processing: Grinding, Cutting, Polishing, Drilling, Rolling
– Rubber & Plastics: Extruders, Moulding, Mixers, Winding

Click Here for Optidrive P2 Specifications

Model ID: ODP-2-42100-1H04A-MN
Series: Optidrive P2

Manufacturer: Invertek Drives

High Performance, Sensorless Vector Control

– Up to 200% torque from zero speed, 150% overload for 60 seconds
– Built-in EMC Filter
– Integral Brake Transistor
– Safe Torque Off function for machine critical safety circuits
– Extensive I/O and communications interface capabilities
– CAN and Modbus RTU communication built-in as standard
– Open Loop Vector control provides optimum control of the output torque level
– Better than 0.5% speed holding accuracy in Open Loop Vector Operation
– PID Closed Loop Tension Control with feedback from a load cell or dancer arm
– Encoder feedback option allows for a very wide speed range, even down to zero speed
– Multiple Preset Speed or Variable Speed operation
– Dedicated Hoist Mode Operation with motor holding brake control algorithm
– PM Motor control mode allows open loop operation with Permanent Magnet motors

Standards Compliance

– Low Voltage Directive: 2014/35/EU
– EMC Directive: 2014/30/EU
– Additional Conformance: UL, cUL, EAC, RCM
– Marine Certification: DNV Type Approval
– Environmental Conditions: Designed to meet IEC 60721-3-3, in operation. IP20 Drives: 3S2/3C2. NEMA 12 and NEMA 4X Drives: 3S3/3C3

Applications

– Industrial: Fans, Pumps, Conveyors, Cranes, Air Compressors
– Marine: Bow Thrusters, Elevators, Winches, Pumps, Hoist
– Mining & Quarrying: Feed Conveyers, Crushers, Cranes
– Metals & Processing: Grinding, Cutting, Polishing, Drilling, Rolling
– Rubber & Plastics: Extruders, Moulding, Mixers, Winding

Click Here for Optidrive P2 Specifications

Model ID: ODP-2-42075-1H04B-MN
Series: Optidrive P2

Manufacturer: Invertek Drives

High Performance, Sensorless Vector Control

– Up to 200% torque from zero speed, 150% overload for 60 seconds
– Built-in EMC Filter
– Integral Brake Transistor
– Safe Torque Off function for machine critical safety circuits
– Extensive I/O and communications interface capabilities
– CAN and Modbus RTU communication built-in as standard
– Open Loop Vector control provides optimum control of the output torque level
– Better than 0.5% speed holding accuracy in Open Loop Vector Operation
– PID Closed Loop Tension Control with feedback from a load cell or dancer arm
– Encoder feedback option allows for a very wide speed range, even down to zero speed
– Multiple Preset Speed or Variable Speed operation
– Dedicated Hoist Mode Operation with motor holding brake control algorithm
– PM Motor control mode allows open loop operation with Permanent Magnet motors

Standards Compliance

– Low Voltage Directive: 2014/35/EU
– EMC Directive: 2014/30/EU
– Additional Conformance: UL, cUL, EAC, RCM
– Marine Certification: DNV Type Approval
– Environmental Conditions: Designed to meet IEC 60721-3-3, in operation. IP20 Drives: 3S2/3C2. NEMA 12 and NEMA 4X Drives: 3S3/3C3

Applications

– Industrial: Fans, Pumps, Conveyors, Cranes, Air Compressors
– Marine: Bow Thrusters, Elevators, Winches, Pumps, Hoist
– Mining & Quarrying: Feed Conveyers, Crushers, Cranes
– Metals & Processing: Grinding, Cutting, Polishing, Drilling, Rolling
– Rubber & Plastics: Extruders, Moulding, Mixers, Winding

Click Here for Optidrive P2 Specifications

Model ID: ODP-2-42075-1H04A-MN
Series: Optidrive P2

Manufacturer: Invertek Drives

High Performance, Sensorless Vector Control

– Up to 200% torque from zero speed, 150% overload for 60 seconds
– Built-in EMC Filter
– Integral Brake Transistor
– Safe Torque Off function for machine critical safety circuits
– Extensive I/O and communications interface capabilities
– CAN and Modbus RTU communication built-in as standard
– Open Loop Vector control provides optimum control of the output torque level
– Better than 0.5% speed holding accuracy in Open Loop Vector Operation
– PID Closed Loop Tension Control with feedback from a load cell or dancer arm
– Encoder feedback option allows for a very wide speed range, even down to zero speed
– Multiple Preset Speed or Variable Speed operation
– Dedicated Hoist Mode Operation with motor holding brake control algorithm
– PM Motor control mode allows open loop operation with Permanent Magnet motors

Standards Compliance

– Low Voltage Directive: 2014/35/EU
– EMC Directive: 2014/30/EU
– Additional Conformance: UL, cUL, EAC, RCM
– Marine Certification: DNV Type Approval
– Environmental Conditions: Designed to meet IEC 60721-3-3, in operation. IP20 Drives: 3S2/3C2. NEMA 12 and NEMA 4X Drives: 3S3/3C3

Applications

– Industrial: Fans, Pumps, Conveyors, Cranes, Air Compressors
– Marine: Bow Thrusters, Elevators, Winches, Pumps, Hoist
– Mining & Quarrying: Feed Conveyers, Crushers, Cranes
– Metals & Processing: Grinding, Cutting, Polishing, Drilling, Rolling
– Rubber & Plastics: Extruders, Moulding, Mixers, Winding

Click Here for Optidrive P2 Specifications