Products – Variable Frequency Drives – VFDs – The VFD Exchange https://vfdexchange.com An exclusive variable frequency drive marketplace! Sun, 07 Dec 2025 18:39:11 +0000 en-US hourly 1 https://wordpress.org/?v=6.9 https://vfdexchange.com/wp-content/uploads/2020/11/cropped-vfd.com_logo_10000res-32x32.webp Products – Variable Frequency Drives – VFDs – The VFD Exchange https://vfdexchange.com 32 32 L11-FJ400P3 – Power Disconnect Fusible 400A, 3-Pole, NEMA 4/12 Steel https://vfdexchange.com/product/l11-fj400p3 Sun, 07 Dec 2025 18:31:20 +0000 https://vfdexchange.com/?post_type=product&p=20614 Model ID: L11-FJ400P3 Series: L11 Disconnect Switches Manufacturer: Sprecher + Schuh

Rated Current: 400 Amps Number of Poles: 3-Pole Design: Fusible (Class J) Enclosure Rating: NEMA 4/12 Enclosure Material: Sheet Metal

Call Today: 1-800-970-6340

[maxbutton id="205"]]]> Sprecher + Schuh L11-FJ400P3
Series: L11 Disconnect Switches

Power Disconnect 3-Pole, 400A with NEMA 4/12 Sheet Metal rated enclosure.

33.1in x 24.0in x 15.1in (H x W x D)

Sprecher + Schuh’s L11 series of fused and non-fused disconnect switches complies with UL98 service entrance requirements and is NFPA 79 compliant. This family of rod operated switches is suitable for applications that require small panel space and superior short circuit protection. The L11 Fusible switches are available from 100A up to 800A, and are designed to be used with Class J & L fuses. The L11 Non-Fusible switches are available from 100A up to 1200A. Optional auxiliary contacts can also be mounted on the switch for control circuit use. The L11 family performance comes in a compact design, leaving room for additional branch circuit components within the panel. Sprecher + Schuh

]]> L11-FJ200P3 – Power Disconnect Fusible 200A, 3-Pole, NEMA 4/12 Steel https://vfdexchange.com/product/l11-fj200p3 Sun, 07 Dec 2025 17:25:30 +0000 https://vfdexchange.com/?post_type=product&p=20612 Model ID: L11-FJ200P3 Series: L11 Disconnect Switches Manufacturer: Sprecher + Schuh

Rated Current: 200 Amps Number of Poles: 3-Pole Design: Fusible (Class J) Enclosure Rating: NEMA 4/12 Enclosure Material: Sheet Metal

Call Today: 1-800-970-6340

[maxbutton id="205"]]]> Sprecher + Schuh L11-FJ200P3
Series: L11 Disconnect Switches

Power Disconnect 3-Pole, 200A with NEMA 4/12 Sheet Metal rated enclosure.

27.1in x 16.0in x 11.1in (H x W x D)

Sprecher + Schuh’s L11 series of fused and non-fused disconnect switches complies with UL98 service entrance requirements and is NFPA 79 compliant. This family of rod operated switches is suitable for applications that require small panel space and superior short circuit protection. The L11 Fusible switches are available from 100A up to 800A, and are designed to be used with Class J & L fuses. The L11 Non-Fusible switches are available from 100A up to 1200A. Optional auxiliary contacts can also be mounted on the switch for control circuit use. The L11 family performance comes in a compact design, leaving room for additional branch circuit components within the panel. Sprecher + Schuh

]]> L11-FJ100P3 – Power Disconnect Fusible 100A, 3-Pole, NEMA 4/12 Steel https://vfdexchange.com/product/l11-fj100p3 Sun, 07 Dec 2025 15:14:02 +0000 https://vfdexchange.com/?post_type=product&p=20608 Model ID: L11-FJ100P3 Series: L11 Disconnect Switches Manufacturer: Sprecher + Schuh

Rated Current: 100 Amps Number of Poles: 3-Pole Design: Fusible (Class J) Enclosure Rating: NEMA 4/12 Enclosure Material: Sheet Metal

Call Today: 1-800-970-6340

[maxbutton id="205"]]]> Sprecher + Schuh L11-FJ100P3
Series: L11 Disconnect Switches

Power Disconnect 3-Pole, 100A with NEMA 4/12 Sheet Metal rated enclosure.

16.0in x 16.0in x 11.1in (H x W x D)

Sprecher + Schuh’s L11 series of fused and non-fused disconnect switches complies with UL98 service entrance requirements and is NFPA 79 compliant. This family of rod operated switches is suitable for applications that require small panel space and superior short circuit protection. The L11 Fusible switches are available from 100A up to 800A, and are designed to be used with Class J & L fuses. The L11 Non-Fusible switches are available from 100A up to 1200A. Optional auxiliary contacts can also be mounted on the switch for control circuit use. The L11 family performance comes in a compact design, leaving room for additional branch circuit components within the panel. Sprecher + Schuh

]]> REOHM BW156/1200/100 UL – Braking Resistor 1200W, 100Ω https://vfdexchange.com/product/reohm-bw-156-1200-100-ul-braking-resistor-1200w-100%cf%89 Fri, 14 Nov 2025 03:34:50 +0000 https://vfdexchange.com/?post_type=product&p=20592 Model ID: BW 156/1200/100 UL Series: Braking Resistor

Resistance: 100 Ohm Continuous Power: 1200 Watts Max Rated Voltage: 900V

*REOHM BW 156/1200/100 UL can be used with the Optidrive E3 General Purpose series and Optidrive P2 High Performance series.

Call Today: 1-800-970-6340

[maxbutton id="205"]]]> REOHM BW 156/1200/100 UL
Series: Braking Resistor

REOHM BW 156/1200/100 UL – Brake Resistor, 100R, 1200W

500mm x 104mm x 53mm (L x W x H)

Brake resistors are used to dissipate energy that is transferred back from the motor to the drive during regeneration – for example when stopping or slowing down high inertia loads. Each VFD that has a built-in braking transistor will have a recommended braking resistance in its user guide. Make sure brake resistor’s resistance (Ohms) is equal or greater than the recommended braking resistance value.

]]> REOHM BW156/1200/72 UL – Braking Resistor 1200W, 72Ω https://vfdexchange.com/product/reohm-bw-156-1200-72-ul-braking-resistor-1200w-72%cf%89 Fri, 14 Nov 2025 03:32:52 +0000 https://vfdexchange.com/?post_type=product&p=20591 Model ID: BW 156/1200/72 UL Series: Braking Resistor

Resistance: 72 Ohm Continuous Power: 1200 Watts Max Rated Voltage: 900V

*REOHM BW 156/1200/72 UL can be used with the Optidrive E3 General Purpose series and Optidrive P2 High Performance series.

Call Today: 1-800-970-6340

[maxbutton id="205"]]]> REOHM BW 156/1200/72 UL
Series: Braking Resistor

REOHM BW 156/1200/72 UL – Brake Resistor, 72R, 1200W

500mm x 104mm x 53mm (L x W x H)

Brake resistors are used to dissipate energy that is transferred back from the motor to the drive during regeneration – for example when stopping or slowing down high inertia loads. Each VFD that has a built-in braking transistor will have a recommended braking resistance in its user guide. Make sure brake resistor’s resistance (Ohms) is equal or greater than the recommended braking resistance value.

]]> REOHM BW156/1200/42 UL – Braking Resistor 1200W, 42Ω https://vfdexchange.com/product/reohm-bw-156-1200-42-ul-braking-resistor-1200w-42%cf%89 Fri, 14 Nov 2025 03:30:19 +0000 https://vfdexchange.com/?post_type=product&p=20590 Model ID: BW 156/1200/42 UL Series: Braking Resistor

Resistance: 42 Ohm Continuous Power: 1200 Watts Max Rated Voltage: 900V

*REOHM BW 156/1200/42 UL can be used with the Optidrive E3 General Purpose series and Optidrive P2 High Performance series.

Call Today: 1-800-970-6340

[maxbutton id="205"]]]> REOHM BW 156/1200/42 UL
Series: Braking Resistor

REOHM BW 156/1200/42 UL – Brake Resistor, 42R, 1200W

500mm x 104mm x 53mm (L x W x H)

Brake resistors are used to dissipate energy that is transferred back from the motor to the drive during regeneration – for example when stopping or slowing down high inertia loads. Each VFD that has a built-in braking transistor will have a recommended braking resistance in its user guide. Make sure brake resistor’s resistance (Ohms) is equal or greater than the recommended braking resistance value.

]]> REOHM BW156/1200/33 UL – Braking Resistor 1200W, 33Ω https://vfdexchange.com/product/reohm-bw-156-1200-33-ul-braking-resistor-1200w-33%cf%89 Fri, 14 Nov 2025 03:28:26 +0000 https://vfdexchange.com/?post_type=product&p=20589 Model ID: BW 156/1200/33 UL Series: Braking Resistor

Resistance: 33 Ohm Continuous Power: 1200 Watts Max Rated Voltage: 900V

*REOHM BW 156/1200/33 UL can be used with the Optidrive E3 General Purpose series and Optidrive P2 High Performance series.

Call Today: 1-800-970-6340

[maxbutton id="205"]]]> REOHM BW 156/1200/33 UL
Series: Braking Resistor

REOHM BW 156/1200/33 UL – Brake Resistor, 33R, 1200W

500mm x 104mm x 53mm (L x W x H)

Brake resistors are used to dissipate energy that is transferred back from the motor to the drive during regeneration – for example when stopping or slowing down high inertia loads. Each VFD that has a built-in braking transistor will have a recommended braking resistance in its user guide. Make sure brake resistor’s resistance (Ohms) is equal or greater than the recommended braking resistance value.

]]> REOHM BW156/1200/27 UL – Braking Resistor 1200W, 27Ω https://vfdexchange.com/product/reohm-bw-156-1200-27-ul-braking-resistor-1200w-27%cf%89 Fri, 14 Nov 2025 03:26:35 +0000 https://vfdexchange.com/?post_type=product&p=20588 Model ID: BW 156/1200/27 UL Series: Braking Resistor

Resistance: 27 Ohm Continuous Power: 1200 Watts Max Rated Voltage: 900V

*REOHM BW 156/1200/27 UL can be used with the Optidrive E3 General Purpose series and Optidrive P2 High Performance series.

Call Today: 1-800-970-6340

[maxbutton id="205"]]]> REOHM BW 156/1200/27 UL
Series: Braking Resistor

REOHM BW 156/1200/27 UL – Brake Resistor, 27R, 1200W

500mm x 104mm x 53mm (L x W x H)

Brake resistors are used to dissipate energy that is transferred back from the motor to the drive during regeneration – for example when stopping or slowing down high inertia loads. Each VFD that has a built-in braking transistor will have a recommended braking resistance in its user guide. Make sure brake resistor’s resistance (Ohms) is equal or greater than the recommended braking resistance value.

]]> REOHM BW156/1000/10 UL – Braking Resistor 1000W, 10Ω https://vfdexchange.com/product/reohm-bw-156-1000-10-ul-braking-resistor-1000w-10%cf%89 Fri, 14 Nov 2025 03:23:26 +0000 https://vfdexchange.com/?post_type=product&p=20587 Model ID: BW 156/1000/10 UL Series: Braking Resistor

Resistance: 10 Ohm Continuous Power: 1000 Watts Max Rated Voltage: 900V

*REOHM BW 156/1000/10 UL can be used with the Optidrive E3 General Purpose series and Optidrive P2 High Performance series.

Call Today: 1-800-970-6340

[maxbutton id="205"]]]> REOHM WW 156/1000/10 UL
Series: Braking Resistor

REOHM BW 156/1000/10 UL – Brake Resistor, 10R, 1000W

500mm x 104mm x 53mm (L x W x H)

Brake resistors are used to dissipate energy that is transferred back from the motor to the drive during regeneration – for example when stopping or slowing down high inertia loads. Each VFD that has a built-in braking transistor will have a recommended braking resistance in its user guide. Make sure brake resistor’s resistance (Ohms) is equal or greater than the recommended braking resistance value.

]]> REOHM BW156/1000/100 UL – Braking Resistor 1000W, 100Ω https://vfdexchange.com/product/reohm-bw-156-1000-100-ul-braking-resistor-1000w-100%cf%89 Fri, 14 Nov 2025 03:20:59 +0000 https://vfdexchange.com/?post_type=product&p=20586 Model ID: BW 156/1000/100 UL Series: Braking Resistor

Resistance: 100 Ohm Continuous Power: 1000 Watts Max Rated Voltage: 900V

*REOHM BW 156/1000/100 UL can be used with the Optidrive E3 General Purpose series and Optidrive P2 High Performance series.

Call Today: 1-800-970-6340

[maxbutton id="205"]]]> REOHM WW 156/1000/100 UL
Series: Braking Resistor

REOHM BW 156/1000/100 UL – Brake Resistor, 100R, 1000W

500mm x 104mm x 53mm (L x W x H)

Brake resistors are used to dissipate energy that is transferred back from the motor to the drive during regeneration – for example when stopping or slowing down high inertia loads. Each VFD that has a built-in braking transistor will have a recommended braking resistance in its user guide. Make sure brake resistor’s resistance (Ohms) is equal or greater than the recommended braking resistance value.

]]>