OPT-3-HAT03 – Invertek Sun Shade Cover, Frame Size 3 and 4

Direct Sunlight Protection Cover for the Optidrive NEMA 4X / IP66 series.

OPT-3-HAT02 – Invertek Sun Shade Cover, Frame Size 2

Direct Sunlight Protection Cover for the Optidrive NEMA 4X / IP66 series.

OPT-3-HAT01 – Invertek Sun Shade Cover, Frame Size 1

Direct Sunlight Protection Cover for the Optidrive NEMA 4X / IP66 series.

OPT-BR050-IN-I55 – Brake Resistor, Size 2, 50R, 200W

Brake resistors are used to dissipate energy that is transferred back from the motor during the drive during regeneration – for example when stopping or slowing down high inertia loads. Invertek drives range of brake resistors are suitable for light duty braking (5%), without high repeat cycle times. For applications which require high braking power or frequent usage, alternative resistors should be used.

OD-BRES4-IN – Brake Resistor, Size 4, 33R, 500W

Brake resistors are used to dissipate energy that is transferred back from the motor during the drive during regeneration – for example when stopping or slowing down high inertia loads. Invertek drives range of brake resistors are suitable for light duty braking (5%), without high repeat cycle times. For applications which require high braking power or frequent usage, alternative resistors should be used.

OD-BR100-IN – Brake Resistor, Size 2, 100R, 200W

Brake resistors are used to dissipate energy that is transferred back from the motor during the drive during regeneration – for example when stopping or slowing down high inertia loads. Invertek drives range of brake resistors are suitable for light duty braking (5%), without high repeat cycle times. For applications which require high braking power or frequent usage, alternative resistors should be used.

RJ45 BacNet Connector

Compatible with the Optidrive ECO series.

SinCos Encoder Interface

The OPT-2-SINCOS2-IN is a plug in encoder feedback interface for Optidrive P2 Elevator, allowing closed loop motor control of permanent magnet elevator motors. The interface is compatible with Heidenhain ERN1387 SinCos rotary encoder only. Includes Brake release monitoring (in compliance with EN81-20 – protection against unintended car movement).

Compatible with the Optidrive Elevator series.

Endat Encoder Feedback Interface

*This option module is specifically designed to be used with the Optidrive P2
Elevator variable speed drive product and is intended for professional
incorporation into complete equipment or systems. If installed incorrectly it
may present a safety hazard. Before commencing installation and
commissioning, the user should ensure they are fully familiar with the
Optidrive Elevator, and in particular have read the important safety
information and warnings contained in the Optidrive Elevator User Guide.

Compatible with the Optidrive Elevator series.

PT100/PT1000 Module

*The OPT-2-PTXIN-IN is an internally installed terminal option card which provides an additional two PT100 or PT1000 input for compatible drives, to monitor external temperatures. The inputs are automatically detected as PT100 or PT1000 based on the resistance measurement and a combination of PT100 and PT1000 sensors can be used on the same card. The temperature measurement can be read back via the scope channels 84 and 85 or as a data input in the built-in plc program.

Compatible with the Optidrive P2 and Optidrive ECO series.